Do you regularly check your house siphons and drains? It is recommended, but even so, sometimes, you realize that the sink or washbasin does not drain properly or gives off foul odours.
The cause is that you have a clog in the pipes, and the solution is to remove the dirt or whatever is blocking the way and clean them.
Many actions can create a traffic jam in the long run. Below are some of the common causes.
- Accumulation of debris and dirt.
- Installing a pipe improperly.
- Dispose of materials incorrectly or inefficiently.
When you know what caused the traffic jam, it is time to decide on the system to solve it. Here are five best drain unblocking tips and tricks to help you unclog your pipes easily.
1, Use a manual plunger
It’s the most obvious solution, and you’ve probably already tried it. In any case, I will tell you how to use this technique correctly to get the pipe unclogged.
First, you must fill the toilet with a little water until the plunger is soaked. If you need to unclog a sink, before starting any movement, you should cover the overflow with a cloth or towel to produce a vacuum effect.
Once everything is ready, you should start making quick movements, pushing in and pulling out. This will create a pressure that will help unclog the pipe.
This system can be used to solve small jams, and you can choose different types of manual plungers:
Suction cup plunger:
It is the most common. It works by suction. Pulling the plunger handle sucks up the dirt deposits along with the standing water. It is convenient that you repeat this action several times and that you collect the dirt that comes out.
Pneumatic plunger:
It is a modern version of the traditional plunger. It works by air push and suction. You must support it on the drain and operate the handle from top to bottom. You have to repeat this action several times and quickly. This way, you will be putting pressure in the duct and sucking up the dirt.
2, Special products
This is another of the most used alternative because today, many specialized products are marketed to unclog pipes. They are known as chemical plungers.
You can find them in gel, liquid or granule form. Its composition is thought to dissolve fat and other organic residues chemically. When using them, you must take precautions: put on gloves and try not to breathe their vapors.
Although these types of products are likely to solve your problem effectively, they are usually very strong.
3, Wire
If you are convinced that something is obstructing the pipe, you can try this system. It involves introducing a wire down the drain to collect the debris that is causing the clog.
This is precisely the system used by spring plungers. You are introducing the spring and turning each time. This is how you push the dirt forward and, when you remove the spring, you drag it out.
4, Boiling water
This is a straightforward trick. You should only boil salted water in a pot. Then carefully pour the boiling water down the drain.
You must do it little by little, in different batches. In this way, the jam will gradually unravel.
5, Baking soda with vinegar
This is a very economical solution. You should first pour in about five tablespoons or about half a cup of baking soda, followed by a cup of vinegar.
The bicarbonate and vinegar will react when they come into contact, and a kind of foam will be generated. You should let the mixture rest for at least half an hour. To clear it, you must pour boiling water, and the jam will have disappeared.
In conclusion
A jam in the pipes can become a headache. Do not let the problem get worse and solve it as soon as possible. You can also contact drainage company London and ask for help. Remember that, once you have solved the traffic jam, you must follow proper habits to avoid these annoyances again in the future.
