The Advantages of CPP Lining

A leaking pipe is not something to be happy about. And as much as we don’t like it happening, it cannot be avoided altogether. When such happens, it will require repair or replacement. This can be a very stressful and messy process especially when you need to remove the damaged old pipes.

Instead of going through that stress, many are turning to CIPP lining. It is a better and effective way of repairing old pipes which is why we have written this article to show you the advantages of this plumbing technique.

But before we do that, we need to explain what CIPP lining is all about.

CIPP Lining Explained

CIPP is an acronym for Cured-in-Place-Pipe. Therefore, CIPP lining is a technique of fixing pipes without using the trench process with the purpose of restoring old pipes with the use of liquid resin alongside textile liner tube. Hence, this method fixes the damaged pipes without total replacement of the pipes.

This plumbing method is technologically advanced than traditional plumbing and it uses new plumbing equipment such as the Max Inferno, CentriPipe, UnderTaker, etc.

When this method is used, the pipes fixed become stronger and will last long just like new pipes. Therefore, not only does this method fix the burst pipes, it also makes them better than they were before the burst.

The two main components used for CIPP lining are epoxy and pipe coating. The pipe coating ensures that the pipe is protected from rust; besides, it aids in the reduction of the pipe’s surface area that is exposed to water and moisture. The epoxy also aids in preventing pipe rust. These two components ensure that the process is made less messy when compared to total overhaul replacement.

The CIPP lining method also makes use of pipe insulation which is a plastic and polyethylene mixture. This is another component that ensures the pipe is protected from rusting.

And the coating that is employed is a very thin film which also aids in the protection of the rusting. The top layer is protective and can prevent surface damage. Furthermore, this coating is very resistant to several forms of corrosion and mildew.

Advantages of Using CIPP Lining

Now that we have the explanation of CIPP lining out of the way, let us turn our attention to the crux of this article.

But before we give you the advantages of this innovative plumbing method, we must mention that this process is not a DIY (Do-It-Yourself) project. While traditional plumbing can be done by anyone with a bit of technical knowledge, this process requires professional. Do not hire just anybody to do it because even some regular plumbers may lack the ability to carry out this task.

With that said, here are the major advantages of using CIPP lining:

1. It cures or prevents pipe leakage

No one wants a leaking pipe because it can be very damaging for a building and the properties inside; and the repair can cost so much. Pipe leakage is usually because of the breaking down of the material used to make the pipe. Hence, it is always recommended to use pipes that have quality material.

How does CIPP lining cure and prevent pipe leakage? It does this in the following ways:

• A protective film can be installed beside the pipes which will protect the pipes from shock as well as leakage.
• This lining method is very resistant as we mentioned above, hence, the potential for leakage is very low and it also repels water that tries to pass through.
• In the event the lining applied wears out, the material itself that was used for the process is still resistant to moisture and is guaranteed to last for long. Hence, because of this resistant nature, you can reuse the material.
• You can rest assured that the material used won’t crack. Cracks are a major cause of leakages and clogging. Therefore, the maintenance requirement is low. Visit https://staysafe.org/7-tips-for-preventing-pipes-bursting/ to learn how to prevent pipe bursting.

2. Doesn’t require much excavation

We mentioned while explaining that this plumbing technology can be done without using the trench process. What we meant by that is that you don’t have to dig trenches to bury the pipe as it doesn’t require a lot of excavation to fix the damaged pipes.

How does the lining process work? Let’s find out below…

• The liner is usually installed using an already available access area. The most well-known type is the utility or maintenance hole (which was known as manhole).
• CIPP lining professionals will then install the liner using a process known as “wet-out”. If the piping rehabilitation involves sewer areas, most lateral connection restoration is usually done with the aid of a remote device all without any form of excavation. This device will drill a hole into the liner till it gets to the pipe’s lateral connection.
• Sometimes the laterals have to be fixed manually by the professionals. This is done when the damage is more than 24-inch wide.
• Because the lining does not require joints and it has a smooth interior, pipes that have bends can be easily repaired.

3. Its effort and time effective

In other words, it saves effort and time. This plumbing technique doesn’t take a whole day or days to fix. Hence, you don’t have to halt your activities to address the problem. And interesting, this method can be used to fix pipes that are used for water, gas, sewer, or any other fluid.

4. It is cost-effective

Despite being a more technologically advanced process than traditional pipe repair that involves a lot of excavation, CIPP lining actually costs less. This is because it doesn’t require so much equipment and workers. And as we mentioned in the advantage above, the time spent is minimal which is another reason why this process is cheaper. Click here to see the cost comparison between CIPP lining and other plumbing repairs.

5. Makes pipes last longer

When this technique is used, the resistant nature of the liner can cause your pipe to last for more than 50 years. The rate of corrosion and rotting is significantly reduced.

Conclusion

CIPP lining is the best for your old pipes as well as new pipe works. Hiring professionals to aid in the installation of this plumbing technology can save you a lot of headaches and problems in the future.