The importance of the foundation of a house is hidden from none. If due to any reason, the foundation is disturbed, then the whole house will be at stake. So, always pay attention to the foundation of your house. If you observe any kind of damages, get them repaired as soon as possible.
If you are getting foundation damage repair, you should have some basic knowledge about it. Foundation damage repair comes in 6 different types. If you have been missing knowledge regarding them, here is a sneak peek, everything you need to know about these six types.
Using steel piers
This method is used when your foundation moves downwards, or you can even say, sinking in. This type of damage is severe, and you should get repair as soon as possible. First, the foundation is lifted using hydraulic lifting systems; then, steel piers can attain this stable configuration.
Concrete Lifting
Concrete lifting or more commonly known as slab jacking, is the most convenient and cost-effective method. It is utilized when a small portion tends to be sinking downward, not the whole foundation. First, holes are drilled, then we put in cement slurry through these holes. This cement slurry not only levels the foundation but also provides additional ground grip.
Using spot Piers
Spot piers are installed in almost a similar way as steel piers. But they have a much lesser load-carrying capacity. Owing to their small size and structure, they can hardly bear the weight of your house. So it is always better to avoid them. However, if there is a structure having little load, spot piers can be pretty helpful.
Using a sealant
Another method is to use a sealant to seal the cracks in your foundation. Though it sounds useless, they are actually quite helpful. You can go for any good sealant to seal these cracks. The plus point is that they are super easy to get done with and repair the damage. It is one of the most effective Greenville foundation repair.
Using helical tieback anchors
Helical tieback anchors are long roads that actually tie the foundation walls back into the ground. These rods have long helical anchors to provide a strong grip on both sides. Using helical tieback anchors is one of the most effective methods. This method is used for bowed walls. They tend to straighten them up.
Using polyurethane foam
High-density polyurethane foam is a very effective method of foundation damage repair. First, for foundation repair, a grid is drilled into the concrete then the high-density polyurethane foam is pumped into it. The thing to be careful about is that this foam comes in a range of firmness. Choose the highest level for better results.
Though you might not be interested in these types, it is very closely related to the repair. Not every type will be suitable for your foundation damage repair. Check your geological area, damage that has occurred, and other factors to choose the right one.
